Skip to Main navigation Skip to Left navigation Skip to Main content Skip to Footer

University of Minnesota Extension
www.extension.umn.edu
612-624-1222

Extension > Food > Small Farms > Alternative and small-scale livestock systems > Poultry > Build your own poultry hut

Print Icon Email Icon Share Icon
Print an info sheet (491 K PDF)

Build your own poultry hut

Wayne Martin and Alison Link

Background

Raising poultry on pasture as a commercial enterprise or as a hobby has become more popular with smaller scale farmers around the country, who sell to consumers through a variety of venues. Some raise their birds in a "free range" method, allowing the birds to roam freely over the pasture. Others prefer to raise birds in portable huts that can be moved frequently to reduce losses to predators and weather, using a method called "pasture-raised".

There are many styles of huts that can be easily built very cheaply. This information sheet shows you how to build huts that we currently use on the St Paul Campus Student Organic Farm at the University of Minnesota. We now have five huts that are 8'x8', built on runners with wheels, and each holds about 35 broilers.

Tools needed for the project

Estimated cost of materials needed

2 - 4" x 4" x 8' $16.00
4 - 2" x 4" x 8' $22.00
1 - ½" x 4' x 5' hardware cloth $42.00
2 - ½" x 4' x 5' hardware cloth $15.00
1 - Galvanized poultry netting, 24" H x 50' $9.00
3 - Cattle panels 50" x 16' $60.00
17 - Vinyl siding panels $120.00
4 - 10" x 1.75" steel centered wheel $40.00
4 - ¼" x 6" bolts $10.00
Washers and nuts, ½ inch diameter $5.00
2 - Grip fast 2 ½" fence staples - 1 lb box $.600
2 - 16-gauge 25 ft. galvanized steel wire $4.00
  $349.00

Note: An alternative to using vinyl siding is to use a heavy duty tarp to cover your hut. These cost about $30-$45 up front, but will likely need to be replaced every couple of years. Also note that wind and sun can speed the deteriorating process for tarps.

Building instructions

Construct the frame

  1. Lay the 4"x4"x8's parallel to each other. At each end, attach a 2"x4"x8', laying it over the top of the 4x4's, and using wood or deck screws to attach.
  2. Drill holes through the 4"x4"x8's, one about a foot or so away from each end, for the wheels. The hole should be at least ½ inch diameter, to serve a ½ inch bolt.

Attach the cattle panels

  1. Elevate the frame, so that all 4 corners are off the ground at the appropriate height for attaching the wheels. Do not attach the wheels just yet.
  2. Bend 2 cattle panels in an arc over the frame, and staple them to the frame, about 1 inch or less off the ground, using 2" or 2 ½" staples. Make sure the panels do not cover the holes drilled in the frame where the wheels will attach.
  3. Cut the third cattle panel in half, and attach one half to what will become the back of the hut. Affix this panel at the same level off the ground as the panels that form an arc over the frame.

Build the door frame and door

  1. Build a door frame on the front of the hut, using 2"x4"x8's for the frame, and 2"x2"x8's to make the door. We usually build rectangular doors that are tall enough for a person to walk through comfortably, but feel free to adapt the door design any way you think will work for you. There is no one way to build a door, so choose a design that will fit your needs.

Wrap hut with hardware cloth and chicken coop wire

  1. Wrap the entire lower half of the hut with hardware cloth. Cover the lower part of the door, but of course trim the hardware cloth so that the door can open and close. Attach the hardware cloth with 1" or 1 ½" staples.
  2. Fill in the upper half of front and back with the chicken coop wire. Be sure to use chicken coop wire for only the upper half of the hut. Chicken coop wire is sufficient to keep birds and flying predators out, but the holes large enough to let some ground predators reach in and do damage to the birds. Hardware cloth will work better on the lower half of the hut.

Attach the wheels

  1. Now attach the wheels. Run the 4- ½"x6" bolt through each hole drilled in the 4"x4" runner, from the inside. Place washers on both inside and outside of runner. Attach wheel on the outside of the hut, using washers and nut.

Attach the vinyl siding

  1. The vinyl siding pieces come 12 ft. long, so they will need to be cut to 8 ft. lengths to match the hut. Then, when laying the rows of siding, every other row can consist of two 4 ft. lengths of vinyl siding, alternated with 8 ft. lengths of siding. The first row should run along the bottom of the cattle panels, starting the same distance from the ground as the panels. To attach the siding, two people will be needed for the task, one on the inside of the hut, the other on the outside:
      • The person on the outside of the hut will hold the panel in place, and at the same time run a short piece of wire through the holes that run along the top of the vinyl siding piece.
      • The person on the inside of the hut will grasp the wire strand and tie it tightly to the cattle panel. The next row of vinyl siding can then be attached in the same method, locking the panels together in the grooves on the siding made for that purpose. Work your way up on both sides so that they meet at the top. Then overlap one piece to prevent water coming in from above.

One last thing

  1. Inside and at the back of the hut, hang a lightweight piece of wood or PVC pipe at ground level, and attach it to the cattle panels using rope or twine. It can be used as a bumper panel when moving the birds, to keep them from getting caught under the frame of the hut.

You are done! To move the hut, you can use a two-wheeled dolly, or attach ropes to the front or back to move it along.

Drawbacks

Advantages

Additional resources

Questions or comments?

Wayne Martin authored this information sheet and can be reached at marti067@umn.edu or at 612-625-6224.

  • © Regents of the University of Minnesota. All rights reserved.
  • The University of Minnesota is an equal opportunity educator and employer. Privacy