Media Contact: Catherine Dehdashti, U of M Extension (612) 625-0237, ced@umn.edu

When drying walls after a flood, be fast, thorough and safe

Try to remove mud and water quickly. Surface dry materials with heat and air within 24 - 48 hours. Quick drying and removal of contaminated items may help to prevent the onset of biological contamination or mold growth.

The total drying time depends on the type of materials used to build the house. It also depends on the amount of air circulation and the moisture content of the air. Drying times can be significantly reduced by continuous circulation of heated air over the wet surfaces. Dehumidification will also help.

To immediately release the water and mud from wall cavities, remove interior wall finishes and insulation. All wall finishes from the high water line plus any capillary rise (water that has been absorbed upward) should be removed and discarded. Capillary action is very strong so this could be as much as 1 ½ feet above the high water line - maybe more. If you measure, see or feel moisture, remove that portion of the wall and discard it.

All insulation that has become wet MUST be removed to facilitate rapid drying of the inner wall structures. Wet insulation should then be discarded, as it will be contaminated. Most insulating materials are adversely affected by water. Even though plaster may survive brief water exposure, the wall cavity must be dried quickly. This helps prevent contamination and potential decay of wood framing members. Remember, any insulation in the wall cavity that is wet must be removed immediately and discarded.

With proper cleaning, disinfecting and refinishing, it may be possible to salvage trim and wall finishes that are made from solid wood. Most paneling will need to be discarded.

A moisture meter can be used to identify wet walls. If you have access to one, you can more readily determine wet walls and finishes. If you don't have a meter, be conservative about what materials to keep. Discard anything you aren't sure about. The moisture meter is also helpful in determining when walls are dry enough to re-insulate and close up, although it is not absolutely necessary if you follow the above recommendations for drying. Moisture meters may be available at building supply stores and through home inspectors.

For more detailed information, check Extension's flood impacts website, www.extension.umn.edu, click on "Floods & Rain." This website connects Minnesotans to the most up-to-date information on flood response, safety and cleanup issues. More information is being added to the site each day.

If you do not have Internet access, you can call Extension’s Flood & Farm Information Line (800) 232-9077, staffed by Extension personnel Monday through Friday from 8:30 a.m. to 4:30 p.m. The Flood & Farm Information Line is a resource for questions about water, crops, horticulture and climatology issues. Questions at other times of the day and on weekends can be left on voicemail and will be returned during staffed hours. In addition, questions can be e-mailed to the Flood & Farm Information Line at fil@umn.edu, and a written response will be returned. For household and family oriented questions, you may call Extension's AnswerLine at (800) 854-1678. AnswerLine is staffed Monday through Friday from 9 a.m. to noon and 1 to 4 p.m.

-------

URL: http:// www.extension.umn.edu/extensionnews/2009/drying-walls-after-flood.html  This page was updated April 6, 2009 .
Online Privacy Statement.  Contact Information.

University of Minnesota Extension is an equal opportunity educator and employer.
Copyright  ©  Regents of the University of Minnesota.  All rights reserved.